DriveTech - Heavy Traffic Licenses and Endorsements

Heavy Traffic Class 2 Licence

Class 2 is a rigid vehicle with a gross laden weight of more than 4,500kg but less than 18,001kg.

About the Course

The Class 2 Licence is a two day Course. It consists of three Unit Standards throughout the two days. It also involves the passing of your learner licence. You will be instructed on the Class 2 and General Road Code, when you are ready you then head down to the AA or VTNZ to sit the Class 2 Learner Licence. (You are not required to purchase a road code for this.)

You will then come back and you are required to be trained and work through each Unit Standard by filling out a work book. (This is an open book exercise) as this is part of your learning process, followed by a closed book assessment. The second day you will finish any training and assessments and be taken for a pre assessment drive which can take from 15 minutes to one hour depending on your experience. The assessor will then take you for a practical drive. Once you are competent on the Assessments and Drive you will be given your Class 2 Licence Certificate which you then produce to the AA or VTNZ, so it is recorded on your licence.

Unit Standards

Units Title Level Credits Version
17574 Operate a rigid vehicle to meet the requirements for a full Class 2 Driver Licence. 3 7 4
24089 Demonstrate knowledge of fatigue management, work time and driver logbook requirements. 3 5 1
15158 Carry out start up and shut down procedures on a heavy motor vehicle and make ready for use. 2 4 3

What Will I Need?



site design by ZiLT site design by ZiLT